High Polish Silver
6061 Aluminum, Single Downtube Fat Quad Design, Internally-machined Integrated Head Tube, Looptail Rear End, Retro Dropouts, 100mm Euro Bottom Bracket, 170mm Spaced Dropouts, Disc Brake Tabs
Landing Gear, Full Cr-Mo, Disc Tabs, 450mm Axle to Crown, 38mm Offset, 135mm Spaced Dropouts
SE V-Ridge 3-pc Cr-Mo Cranks,175mm, External Sealed Bearing Euro Bottom Bracket, 200mm Spindle length, 19mm Spindle Diameter, 27T Alloy SE Racing Sprocket
X-Pedo Low-profile Platform w/ Removable Pins
KMC S1
Alloy 36H Hubs, Sealed Rear, 135mm Front Hub & 170mm Rear Hub, w/ SE Bubble Fat 65mm Rims, 14T Cassette, Stainless Spokes
Vee Tire Co x SE Racing Chicane, 26" x 3.5", 72TPI, Front & Rear
Tektro Auriga, Hydraulic Disc, Easy to Adjust Open System, Dual Piston, Automatic Caliper Positioning, 180mm Front Rotor, 160mm Rear Rotor
Tektro Auriga, 2-Finger Alloy, Front & Rear
FSA Orbit CE, Sealed 1-1/8" Integrated
Big Honkin' Cr-Mo Cruiser Bar, 29" x 7", 12° Backsweep, 2° Upsweep
Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
Oakley B-1B Grips, Made in USA, w/ SE Donuts
SE Flyer Seat w/ Custom SE Bottle Opener Brace
Micro-Adjust Alloy, 27.2mm
SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
Alloy Valve Caps, SE Chain Tensioners
35.8 lbs / 16.23 kgs
| Top Tube, Actual | 22.2" | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Seat Tube, Center To Top | 14.9" | |||||||||
| Seat Tube Angle | 72° | |||||||||
| Head Tube Angle | 70° | |||||||||
| Chainstay Length | 17.8" | |||||||||
| Wheelbase | 42.6" | |||||||||
| Bottom Bracket Height | 12.4" | |||||||||
| Standover | 30" | |||||||||
| Suggested Rider Size | 5'3"+ (160cm+) | |||||||||
| Stem | 55mm | |||||||||
| Handlebar Width | 29" | |||||||||
| Crank | 175mm | |||||||||
| Wheel Size | 26" | |||||||||
| Seat Post Diameter | 27.2mm |
