SE Blue
25.9 lbs / 11.75 kgs
Stu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wraps Beneath 68mm Wide American Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
Cowboy Cut Landing Gear, Full Cr-Mo
SE TSC Cranks, 175mm, Sealed Bearing American Bottom Bracket, 141mm Spindle Length, 19mm Spindle Diameter, Alloy Spider, 44T Alloy Chainring
X-Pedo Low-profile Platform w/ Removable Pins
KMC Z6
Sealed Bearing SE Mohawk Hubs, 36H High-Flange Alloy, w/ Double-wall Rims, 16T Freewheel, Stainless Spokes
CST Caesar, 20" x 2.125" Front. 20" x 1.75" Rear
BX-310 V-Brake, Slick Cable
Tektro 316A, 2-Finger Alloy
Tange DX4, Aluminum Cups, 1-1/8" Threadless, SE Wing Logos on Bottom Cup
Cr-Mo Power Wing, 30" x 9", 10° Backsweep, 1° Upsweep
Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
Special Edition ODI Mushroom II "Stu Thomsen" Signature Dual-Ply Grips, Made in USA, w/ Stompin' Stu Donuts
Special Edition Kashimax RS x SE Racing Collab Seat, Made in Japan
Micro-Adjust Alloy, 27.2mm
OG SE Seat Clamp, 29.8mm Inner Diameter
STR Quad Padset, Alloy Valve Caps, Custom Stu Thomsen STR-1 Sticker Sheet
Top Tube, Actual | 21.75" | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Seat Tube, Center To Top | 12" | |||||||||
Seat Tube Angle | 71° | |||||||||
Head Tube Angle | 74° | |||||||||
Chainstay Length | 15.25" | |||||||||
Wheelbase | 38.75" | |||||||||
Bottom Bracket Height | 11.7" | |||||||||
Standover | 22.7" | |||||||||
Suggested Rider Size | 5'5"+ (165cm+) | |||||||||
Stem | 55mm | |||||||||
Handlebar Width | 30" | |||||||||
Crank | 180mm | |||||||||
Wheel Size | 20" | |||||||||
Seat Post Diameter | 27.2mm |