Harlem Camo
Dblocks Wheelie King Model, 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm Euro Bottom Bracket, Retro Dropouts
Landing Gear, Full Cr-Mo
SE V-Ridge 3-pc Cr-Mo, Cranks, 175mm, Sealed Euro Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 33T Alloy SE Racing Sprocket
X-Pedo Low-profile Platform w/ Removable Pins
KMC S1
Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 15T Freewheel, Stainless Spokes
Freedom ThickSlick Comp, 29" x 2.10" Front & Rear
Tektro 837-AL V-Brake, Slick Cable
Tektro 316A, 2-Finger Alloy
Tange 1-1/8" Threadless
Cr-Mo Power Wing Cruiser Bar, 28" x 7", 10° Backsweep, 1° Upsweep
Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ Keep that Wheel Up Donuts
Raise It Up Flyer Seat w/ Custom SE Bottle Opener Brace
Micro-Adjust Alloy, 27.2mm
Alloy, 31.8mm Inner Diameter
Dblocks Edition Number Plate, Cycle Squad Maniaccs Padset, Alloy Valve Caps, SE Wheelie Pegs
29.2 lbs / 13.24 kgs
| Top Tube, Actual | 23.6" | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Seat Tube, Center To Top | 16.9" | |||||||||
| Seat Tube Angle | 71° | |||||||||
| Head Tube Angle | 71° | |||||||||
| Chainstay Length | 18" | |||||||||
| Wheelbase | 43.7" | |||||||||
| Bottom Bracket Height | 12" | |||||||||
| Standover | 30.5" | |||||||||
| Suggested Rider Size | 5'5"+ (165cm+) | |||||||||
| Stem | 55mm | |||||||||
| Handlebar Width | 29" | |||||||||
| Crank | 175mm | |||||||||
| Wheel Size | 29" | |||||||||
| Seat Post Diameter | 27.2mm |
