SE Blue
Stu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wrap Beneath Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
Cowboy Cut Landing Gear, Full Cr-Mo
Redline Flight Cranks, Dual Pinch Bolt, 175mm, Sealed Bearing American Bottom Bracket, 33T Alloy SE Racing Sprocket
X-Pedo Low-profile Platform w/ Removable Pins
KMC Z410A
Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, ACS Crossfire 15T Freewheel, Stainless Spokes, Frame Protector Alloy Washers
Vee Tire Co x SE Racing Speedster, 29" x 2.10" Front & Rear
Tektro 837-AL V-Brake, Slick Cable
Tektro 316A, 2-Finger Alloy
Tange 1-1/8" Threadless
Cr-Mo Super Big Honkin' Cruiser Bar, 31" x 7"
Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
Special Edition ODI Mushroom II "Stu Thomsen" Signature Dual-Ply Grips w/ SE Donuts, Made in USA
SE Flyer Seat
Retro Fluted Micro-Adjust Alloy, 27.2mm
Chrome STR Quad Padset, Alloy Valve Caps, Alloy Rear Wheel Washers, Custom Stu Thomsen STR-29 Sticker Sheet, Authentic Trading Card Personally Signed by Stu Thomsen
31.5 lbs / 14.29 kgs
Top Tube, Actual | 22.2" | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Seat Tube, Center To Top | 16.1" | |||||||||
Seat Tube Angle | 72° | |||||||||
Head Tube Angle | 70° | |||||||||
Chainstay Length | 17.8" | |||||||||
Wheelbase | 42.3" | |||||||||
Bottom Bracket Height | 12.5" | |||||||||
Standover | 29.3" | |||||||||
Suggested Rider Size | 5'3"+ (160cm+) | |||||||||
Stem | 55mm | |||||||||
Handlebar Width | 31" | |||||||||
Crank | 175mm | |||||||||
Wheel Size | 29" | |||||||||
Seat Post Diameter | 27.2mm |