5'5"+ (165cm+)
Snow Camo
Dblocks Wheelie King Model, 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts
Landing Gear, Full Cr-Mo
SE V-Ridge 3-pc Cr-Mo Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 36T Alloy SE Racing Sprocket
Wellgo Low-profile Platform
KMC S1
Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 16T Freewheel, Stainless Spokes
Freedom ThickSlick Comp, 29" x 2.10" Front & Rear
Tektro 855AL V-Brake, Linear Cable
Tektro 316A, 2-Finger Alloy
Tange 1-1/8" Threadless
Cr-Mo Power Wing Cruiser Bar, 28" x 7", 10° Backsweep, 1° Upsweep
Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ 45 Years of Radness SE Donuts
Raise It Up Flyer Seat w/ Custom SE Bottle Opener Brace
Micro-Adjust Alloy, 27.2mm
SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
45 Years of SE Radness Padset, Custom Dblocks Sticker Sheet, Alloy Valve Caps, SE Wheelie Pegs
30.5 lbs / 13.83 kgs
| Top Tube, Actual | 23.6" | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Seat Tube, Center To Top | 16.9" | |||||||||
| Seat Tube Angle | 71° | |||||||||
| Head Tube Angle | 71° | |||||||||
| Chainstay Length | 18.25" | |||||||||
| Wheelbase | 44" | |||||||||
| Bottom Bracket Height | 12.25" | |||||||||
| Standover | 30.75" | |||||||||
| Stem | 55mm | |||||||||
| Handlebar Width | 29" | |||||||||
| Crank | 175mm | |||||||||
| Wheel Size | 29" | |||||||||
| Seat Post Diameter | 27.2mm |
