White
6061 Aluminum Floval Tubing, Looptail Rear End, Retro Dropouts
Landing Gear, Full Cr-Mo
SE 3-pc Cr-Mo, SE V-Ridge Cranks, 175mm, Sealed Euro Bottom Bracket, 33T Alloy SE Racing Sprocket
X-Pedo Low-profile Platform w/ Removable Pins
KMC Z410A
Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 15T Freewheel, Stainless Spokes
Vee Tire Co x SE Racing Speedster, 29" x 2.10" Front & Rear
Tektro 837-AL V-Brake, Slick Cable
Tektro 316A, 2-Finger Alloy
Tange 1-1/8" Threadless
Big Honkin' Cr-Mo Cruiser Bar, 29" x 6"
Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
Special Edition Oakley B-1B, Custom Colorway, w/ SE Donuts, Made in USA
Mike Buff SE Flyer Seat w/ Custom SE Bottle Opener Brace
Micro-Adjust Alloy, 27.2mm
SE Racing Rad Plate, Mike Buff BMX Action Padset, Alloy Valve Caps, Custom Mike Buff Big Ripper Sticker Sheet, Authentic Trading Card Personally Signed by Mike Buff, SE Wheelie Pegs
28.4 lbs / 12.88 kgs
Top Tube, Actual | 23.6" | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Seat Tube, Center To Top | 16.9" | |||||||||
Seat Tube Angle | 71° | |||||||||
Head Tube Angle | 71° | |||||||||
Chainstay Length | 18" | |||||||||
Wheelbase | 43.7" | |||||||||
Bottom Bracket Height | 12" | |||||||||
Standover | 30.5" | |||||||||
Suggested Rider Size | 5'5"+ (165cm+) | |||||||||
Stem | 55mm | |||||||||
Handlebar Width | 29" | |||||||||
Crank | 175mm | |||||||||
Wheel Size | 29" | |||||||||
Seat Post Diameter | 27.2mm |